Composite Arch Door Designer

Are you sure you want to reset everything?

This is the overall width and height of the aperture in millimetres, measured brick to brick (we recommend to deduct 10mm to allow for brick tolerance).

A threshold is the bottom section of your door which you will step over.

Different thresholds will have different heights, a full frame threshold will have a height of 70mm, a low ali threshold will have a height of 15mm and a Stormguard Wheelchair Access threshold has a height of 15mm [Check with Gaz]. These heights will exclude the cill.

The cill is the material the door sits on, if required. The height of the cill is 30mm, the different depth options will distinguish the overhang from the frame (70mm).

Face drained is required when no cill is selected, unless you are leaving your current cill in situ.

A face drained door will have small caps fitted towards the bottom of the external frame to allow for drainage, whereas a base drained door will have concealed drainage into the cill.

These are extensions of profile, clipped onto the external frame. These will be required should there be a difference between internal and external measurements due to plaster lines etc.

This is the location of the doors hinge viewed from outside. All hinges are adjustable for toe and healing.

This is viewed from outside.

Where this option is available, it will be the internal piece of glass selected.

Please note: This is not displayed on the preview image.

Lever/Lever handles do not require a key unless locked to enter from outside. Whereas a split spindle will require a key at all times to open the door from outside.

To engage full lock a key will be required on both options.

Please note: There is no visual difference between the two options.

A thumbturn barrel does not have a keyhole on the inside of the door. Instead the door will have a turning knob which is used to engage/unengage the full lock.

The two tone effect of this door is achieved by manually applying the second colour to a through colour base. All of these colours are designed to compliment each other and no two products can ever be identical.

Glass options for your arch door are available in clear or obscured patterns. These will be A rated and toughened as standard.

The height of the midrails are 85mm and will be positioned 927mm up from the bottom of frame.